Public timeline, page 3
Notices
-
My favorite mug that I own for about 25 years has finally cracked. The handle broke on its own from the handling and the temperature changes. The crack was relatively clean. I "fixed" it with super glue but I have little confidence that it'll hold more than a year and I think it'll show other crack in that time.
about a year ago from web-
@scribus The thought did occur to me. The break was quite clean. Also I got the thought after the glue has already set. I also imagined if the handle breaks completely off that I get myself a good chunk of hard wood and make a wooden mug handle and glue it to the mug with an epoxy glue. The wooden handle wouldn't be dishwasher safe however it will transfer less heat.
-
@scribus https://i.imgur.com/JhifvYa.jpeg This is my before/after image of the repair
-
http://rainbowdash.net/url/876565 things are moving
about a year ago from web -
Kung Fu Panda 4 OST doesn't disappoint https://www.youtube.com/watch?v=OadG2zToi1s Instant goosebumps.
about a year ago from web -
My miniature paint box is finished https://www.tumblr.com/adiwan/744764666193100800/
about a year ago from web -
Maybe I'm getting old but I like After Midnight https://www.youtube.com/@AfterMidnightCBS
about a year ago from web -
I'm 3d-printing myself a grid inlay for a new box I acquired for my miniature paints. With this grid inlay I can insert compatible tiles that won't shift when the box is moved. I want to print this https://www.printables.com/model/638320-parametric-gridfinity-paint-rack for all my Army Painter paints and generic open boxes for my brushes and other random stuff. I could print specific containers for a few things but it'd be overkill.
about a year ago from web -
Cool! KDE 6 is finished and the features look cool. https://kde.org/announcements/megarelease/6/ I wait until Debian releases their updated packages and see if my old Thinkpad X201 still works.
about a year ago from web -
Did another thing https://adiwan.tumblr.com/post/743579949596819456/ho-oh-alph-ruins-puzzle-replica-i-was-yet-again
about a year ago from web -
It has been finished!
https://www.tumblr.com/adiwan/743211519247089664/i-finished-a-set-of-magnetic-unown-alphabet-tilesabout a year ago from web-
@scribus Haha. For this one-off it took me about 8 hours. As a fresh owner of a house there is much to do to fix up this old clunker. I also got this same suggestion from my friends to make this as a side hustle. But to be honest: I rather invest the time to make something for my friends than for complete strangers.
-
about a year ago from web
- Scribus likes this.
-
Exclusive preview! It's not finished but I have nearly completed gift for a friend. The paint is still drying and needs some varnish, as well as a magnet on the back side. Other than that it is practically done. Sadly the colors don't show up well in the photo. The color variations are a little bit too subtle for the lighting and camera. https://i.imgur.com/tZKhdQ5.jpeg
about a year ago from web -
I bought a tool for splicing 3d printer filament. It's difficult as hell. I bought it so I can use up all those "too much to throw away but too short to print anything usable" spools. The main problem is that I end up having a splice that is way too thick to fit through the PTFE tube that will definitely end up as a print failure. At this point I think it is a operator failure than a failure of the tool. I give it more tries until I throw it into the corner.
about a year ago from web-
@scribus I think too. Also I have the suspicion that the tool I bought is kind of flawed in both handling and execution https://i.imgur.com/rWLHU0z.jpeg It is made such that you put one end into the area with the Teflon sleeve and the other end to the metal hole. Both ends are then heated by a flame (candle, lighter) for a couple seconds and then pulled into the Teflon area and there the ends are pushed together while the plastic is hot. After it has cooled down the screws are loosened and the tool can be removed. The hole in the Teflon area is about 2mm in diameter while the plastic filament is 1.75mm. Ideally the hole should be the same or close in size. Either way pushing the filament into the hole while it's melted is hard as the filament itself tends to naturally curl because it has been wound up on a spool before and hand-straightening is not really easy or effective enough. I need to shave off the extra bulge back to 1.75mm in order to prevent clogs. Wasn't expensive tough.
-
Character designs for a new series
http://rainbowdash.net/url/876518about a year ago from web -
The next weeks I'll stay inside my house and go and touch grass when I'm finished https://i.imgur.com/bflkBGQ.png
about a year ago from web -
More forbidden cookies https://64.media.tumblr.com/6e4358980dd6c02305160c8d32a32aa3/599ec872b0366322-6e/s2048x3072/f284b69621c3fec3b321fb2ba5fbb839bd5ec8ba.jpg
about a year ago from web -
I created forbidden cookies https://64.media.tumblr.com/65cceb301a29eed07e83106cfb42598f/bbaa5e94fd88dd9d-1b/s2048x3072/49c5397755201123433bdfba56a42fb51e1eefc5.jpg
about a year ago from web -
about a year ago from web
-
My first aid boxes https://i.imgur.com/E7NbRPI.jpg Ammo boxes with appropriate stickers on both sides. I like that they have rubber seals, have a carrying handle and the lid cannot be misplaced.
about a year ago from web -
For a birthday gift for a friend, and a small pokemaniac, I crafted a Mew stone carving (from the first Pokemon movie) out of polymer clay. I used Adobe Illustrator to trace a screenshot and 3D-printed a cookie cutter and stamped it into the polymer clay and added additional stone texture with a ball of aluminium foil. After baking it at 130°C (266°F) for 40 minutes I used the crappiest acrylic paint I own. It did the job but the paint is darkening so much when dry that they turn almost black. With a liberal amount of white and other brighter paint (yellow, orange, red) I got to the end eventually. https://i.imgur.com/D7Nsjy5.jpg
Sunday, 07-Jan-24 13:29:02 UTC from web -
Got my materials to make my "whiteboard post-it notes" https://i.imgur.com/L1qTOfu.jpg https://i.imgur.com/FkZZd5j.jpg
Thursday, 04-Jan-24 14:17:57 UTC from web -
I just ordered a pack of blank ID cards. i want to use them as mini dry erase whiteboards for notes inspired by https://www.thingiverse.com/thing:5772876 However I want to put magnets on the back so I can place and reorganize these notes on my whiteboard. I could write directly on the whiteboard but I'm quickly annoyed on how any bigger change needs to redrawn and thus rarely used. This is an effort to get more organized.
Tuesday, 02-Jan-24 18:25:44 UTC from web -
This track from Judgment just slaps https://www.youtube.com/watch?v=LqcDtgqosiY
Saturday, 30-Dec-23 21:42:56 UTC from web -
Changed my avatar because I got bored with Komi, from the manga "Komi Can't Communicate". I AI-generated a cartoony image of a character from my last one-shot D&D adventure. https://i.imgur.com/v5QhrYZ.jpg
Wednesday, 27-Dec-23 19:54:54 UTC from web -
I listened to Iji Sakura from LAD Ishin way too often https://www.youtube.com/watch?v=2ESM0ckHSBY I like how it gets more intense with each repeat.
Sunday, 24-Dec-23 21:03:34 UTC from web -
https://www.youtube.com/watch?v=kXsvQQYXmUo I'm somehow in a Re-Volt vibe
Friday, 01-Dec-23 10:47:05 UTC from web -
Probably lazy-ass DJ'ing but https://youtu.be/XpilihjywLQ?si=bTgmhz3cvsIDQ12F have a sweet cussing late-90's prog metal album #djscribus !music
Thursday, 23-Nov-23 05:15:49 UTC from web -
Building 3D versions of the cast exclusively for a single shot in this pilot that I’m too dumb to animate by hand http://rainbowdash.net/url/876456
Friday, 20-Oct-23 02:17:43 UTC from web -
Like A Capitalist http://rainbowdash.net/url/876455
Saturday, 14-Oct-23 02:50:29 UTC from web -
This show has its own R-rated version of Bart Simpson http://rainbowdash.net/url/876452
Thursday, 12-Oct-23 06:19:59 UTC from web -
Do I really miss analog, or is it just being a kid? Is it even that? Something, maybe, about the time when there was more ahead than behind? Or are those roughly the same thing? Anyway here's wonderwall https://youtu.be/CKAc3nYEatw?si=lFVTSVwVp4hay1z1
Tuesday, 10-Oct-23 05:34:15 UTC from web
