Conversation
Notices
-
@shred316 Personally, I 2JZ>RB26
Monday, 04-Jun-12 23:05:38 UTC from web-
@renovatedkitchen R u on mighty car mods?
-
@shred316 Mighty car mods, like the australian guys?
-
@renovatedkitchen Yeah, they're like my buds!
-
@shred316 Really!! Thats mighty awesome!! I wish. Im from Canada :(
-
@renovatedkitchen I live in Ohio.
-
@shred316 But arent they all the way in Australia?
-
@renovatedkitchen Yeah, but there's the forum.
-
@shred316 I suppose. I just hang out on my cars forum page though. Im pretty lame
-
@renovatedkitchen Nah. That fact that you found me and immediately... I had a whole thread about RB vs. JZ! You is so epic!!!!
-
@shred316 Lol. Thats awesome! Can the RB26 do 1000hp on a stock block? I just love the 2JZ because (better design over the 1JZ/7M, You could get in in LHD cars here, cheaper parts, and their sound is to die for). But I love em both. LOVE straight engines. Primarily those two l6's
-
@shred316 And you is the epic one!
-
@renovatedkitchen I know the 2JZ is alot more user friendly and cheaper to get parts for, but the first sports car I fell in absolute love with was the Nissan Skyline. It's a solid platform, high rev, and overall a good engine. Sure it isn't a tough as the 2JZ, but I'd still chose it over.
-
@shred316 Thats totally cool. Everyone has their own preferance. Im no 2JZ fanboy. Both engines have their pros and cons, but one thing that is certian, thats that both are going to be remembered for a VERY long time. If I had the cash, I would go grab a (preferably) Supra (just love their look [jellybean on wheels xD]) Or a 240sx and do either a sr20 or 2JZ swap depending on my budget. But both those engines are great.
-
@renovatedkitchen I here you. $10,000 targa top cruiser with stock 200 some HP? You can't go wrong. To my misfortune, I have little moneys, so I'd get a 240sx with an little special engine of mine.
-
@shred316 Mhm. A rust free 240sx. Push the stock ka24 to a quick death, then save money. $10,000 for a stock targa? Is that for a Mk3 or Mk4? Mk4 in Toronto= $15-20k for one that needs work. Its pure stupid. 2JZ's sound ridiculous at 10k RPM. But love their sound at 3-5k RPM. Gives me the shivers everytime. Nissan has always had that great sound. You know the sound I mean.
-
@shred316 You have an RB to swap into there?
-
@renovatedkitchen Oh I know the sound. I love everything cars. I was born into cars. No joke, after I was born, I was taken home in a '65 mustang convertable. Here, I've seen MK3s go for 5-7K. I was never a fan of the KA24, but I need it for the special engine I plan on running. It'll be so sweet! Personally, any engine sounds good at 10,000 RPM. ;D
-
@renovatedkitchen You wanna here my epic swap?
-
@shred316 Lol. That they do. But mainly Inline 6's. 4's just sound like... 4's lol. As much as I love my 4G63, Its still a 4. At least gas is very cheap for it.
-
@renovatedkitchen "He speaks the truth!" Wanna here my swap?
-
@shred316 OH YES, OH YES, OH YES!!! I love hearing about what other people have done!. I wasnt born into cars. Parents and brother love practical cars. Im just facinated in how they work. Anything from a B16 to an LS1. I love knowing how they work, and love to push engines (power wise, not as in racing) to see what they can handle.
-
@renovatedkitchen Here's a 4cyl. you may like. http://derpy.me/fE4jM
-
@renovatedkitchen Do you know much about bolt patterns or bell housings?
-
@colfax Lol. But the weight of the pistons, rods, crank and the fact that its a pushrod which means its got more to the valvetrain, thus cant rev high, I'll still take my 4G63. They can handle amazing power on the stock pistons/rods
-
@colfax Is that a train engine?
-
@shred316 Bolt pattern as in youre swapping it from a 4 bolt to a 5 bolt hub? And bellhousing as in the part of the tranny?
-
@nerthos No, it's a stationary engine, usually running a belt off that huge flywheel to power factory equipment.
-
@renovatedkitchenNo, Head bolt pattern. What do you know about head bolt patterns? The bellhousing adapts the transmission to the engine block.
-
@shred316 Oh... whatca working on?
-
@colfax That makes lots of sense
-
@nerthos I want to use it to power a cell phone charger.
-
@shred316 Hmm. Cant say I know too much of the different head bolt patters. The only thing to do with headstuds is how some people put 7 bolt heads on 6 bolt bottom ends and need to change some things in the head then. Yup. Know what a bell housing is. Matching a 6 speed or something to a built ka24?
-
@nlghtmaremoon I am plotting a KA24 block with an SR20VE VVTL head. General cost: $700-1000. it's right in my range and perfect size. I'm gonna mount it to a 300ZX 5-speed manual. I know, crazy nissan guy, but that's what it is!
-
@renovatedkitchen I am plotting a KA24 block with an SR20VE VVTL head. General cost: $700-1000. it's right in my range and perfect size. I'm gonna mount it to a 300ZX 5-speed manual. I know, crazy nissan guy, but that's what it is
-
@nlghtmaremoon , I thought you were renovatedkitchen. How are you?
-
@shred316 Thats not how you spell 350 w/ turbo 400 transmission....
-
@shred316 good you?
-
@nlghtmaremoon ????? Are you a car pony?
-
@shred316 And it will work okay? Why not just go with a sr20? Building an engine is way. way. way. way. more expensive than most believe it to be. Way more.
-
@shred316 I do love to tinker form time to time ... but usually I am found under a VW bug , or E350 Ambulance, or a hearse... I have had some "Unique cars" I miss my Ambulance... http://ur1.ca/9g0kg
-
@renovatedkitchen KA24 has a bigger stroke, which mean easier power and better response. And it's not going to be a performer.
-
@nlghtmaremoon LOL! cool. ;D
-
@shred316 So youre keeping the stock bottom end of the KA24? Using it as a drift car then Im guessing?
-
@renovatedkitchen No, daily driver. I'm to inexpierience to drift. ;D
-
@shred316 :p. Still sounds like a neat daily. If things look up at work, I am set on getting a 240, doing a swap and trying to drift. Seems so cool. Would love to learn how to do it properly. Are you going to get slightly longer cams to make up for the higher flowing head?
-
@renovatedkitchen stefono!!!
-
@hayseed eh, whats up
-
@renovatedkitchen the sky
-
@renovatedkitchen If I can afford em. Tomei's poncams run around $700, and I can't buy eBay crap.
-
@renovatedkitchen ineed lol hows canada?
-
@shred316 Why not just go for a set of HKS 264's or 272's? They arent very aggressive, so great for street use, but they will bring up the middle range very well, especially with that ka24 block. Never waste a lot of money on an N/A engine. Its like chasing your tail.
-
@renovatedkitchen por que?
-
@hayseed Just stuff
-
@renovatedkitchen tell me
-
@renovatedkitchen So true!!!! What r you working on? even better, what =dream car?
-
@hayseed Its just stuff. Nothing that matters, thats current or that affects anyone else
-
@shred316 Im working on my AWD Talon. It should be seeing its first start early next week. Its been off for so long. And has seen over 10k. Dream car is a LHD Supra TT 6 speed. You?
-
@renovatedkitchen My dream car?
-
@shred316 Mhm. Is it an R34?
-
@renovatedkitchen Do you want specifics?
-
@shred316 Sure! And when I mean my cars gotten more than $10k in it, thats with a stock bottom end. Shows how expensive building properly really is.
-
@renovatedkitchen I know how much it takes to get things done right. I want a 2004 Nissan Skyline GTR R34 V-Spec II Nur with a stroke n' bored RB28DETT N1 Nur to 3.0L and Compound charging. I also want an OC Giken 6-speed Sequential transmission and a full Z0Tune front end. enough?
-
@shred316 What bearings are you going to use for your rods? xD Im kidding. Are you leaving it stock? Thats going to be near impossible to drive here though as its a RHD. R33 and R34 are the best looking ones IMO
-
@renovatedkitchen I'm not leaving it stock at all. Those cars weren't meant to keep stock. I'm moving to Australia in 9 years.
-
@shred316 On my talon, all I want now is to have the bottom end built, a built tranny and a 42r turbo. lol. But on the supra, I would love a set of GSC S3 cams, built top and bottom, ported intake and exhaust, 42r turbo. Would like to leave it as a 3.0, but wouldnt mind a bore. All supporting mods and a Pfitzner dogbox.
-
@shred316 That would be awesome! But be careful of all the dangerous animals/bugs
-
@renovatedkitchen I will. Any plans for your supra?
-
@shred316 "But on the supra, I would love a set of GSC S3 cams, built top and bottom, ported intake and exhaust, 42r turbo. Would like to leave it as a 3.0, but wouldnt mind a bore. All supporting mods and a Pfitzner dogbox."
-
@renovatedkitchen Flttershy: Woohoo! ;D
-
@renovatedkitchen What're you doing to the Talon?
-
@shred316 Mhm ^_^ Have you seen any of the pictures of my talon?
-
@renovatedkitchen No. what's your username. I know my buddy FortKid has a Talon.
-
@renovatedkitchen Do you have any on you?
-
@shred316 GSC S2 cams, Kiggly beehive valve springs, Holset HX35 turbo with a .55 AR hot side, FMIC, Stoptech pads, brembo rotors, 6 puck unsprung clutch, fidanza light weight flywheel, balance shaft elimination, Magnus SMIM, S90 TB (70mm), 1400cc FIC Injectors, KW Variant 3 Coilovers, FP exhaust manifold, 3inch turbo back exhaust, HKS Carbon Ti Catback, refreshed all the timing components, new lifters as well and every supporting mod possible.
-
@shred316 Username on DSM Tuners is renovatdkitchen (like here, but minus that e). Will post some.
-
-
@renovatedkitchen Nice mod list. Some off brand names there, but I'm sure you put thought into 'em. Got any power numbers?
-
@renovatedkitchen cool!!
-
-
-
@renovatedkitchen I love the pony sticker
-
@renovatedkitchen Any power numbers?
-
@renovatedkitchen aw, ive always wanted to do that to my car but i dont know of any bodyshops around the area.
-
@renovatedkitchen also, what's your facebook?
-
@shred316 Oooo. Nothing off brand went into that car. Nothings at all. GSC makes the best cams for us, Kiggly makes great valvetrain stuff for DSM's, Fidanza makes good flywheels, KW makes coilovers that only pro racers use.
-
@renovatedkitchen I've heard of Fidenza and Kiggly, but not the others.
-
@shred316 I love it too ^_^. My car loves RD. The cams are very aggressive for level 2 cams and have a 274 duration. No numbers yet, but should hit 400-500hp at the wheels (AWD). On a bone stock bottom end and tranny xD.
-
@renovatedkitchen Wow. I can't picture those kinda numbers at my level of stuff, but that's so cool you got it.
-
@shred316 Oh. Much over 10k went into the build. Facebook is Stephan Tanchak. I would post picts of when I first got it, but when I did, It had some crappy exhaust, shot springs, and silly chrome rims. *pukes*
-
@iluvzfluttershy Do what to your car? All my work was done in my garage by... me ^_^
-
@shred316 Mhm. It cost me a fortune. But those are crazy numbers for a 4 cyl. But thats why I love DSM's ^_^. Factory overkill on the bottom end
-
@shred316 From 210hp at the crank stock to ~500hp at the wheels.
-
@renovatedkitchen oh cool i have a Hyundai Elantra. ive only had experience putting in new headlights
-
@renovatedkitchen Yeah, I've helped buddy with his old eclipse. It was alot of fun. I can't find anyhting for your name.
-
@iluvzfluttershy Dont see one getting any high numbers from an elantra, but keep things simple unless you know what you are doing. I learned the hard way :P. It takes a lot of time
-
@renovatedkitchen I'd ask for a sound clip, but I see it's in pieces. Are you sure you have a facebook?
-
@renovatedkitchen me too. its a hand-me-down car full of dents cause my sister gets her bike out of the garage alot. My dad gave it to me after he got the new camry.
-
@renovatedkitchen It's Stephan Hooves!!!!
-
@shred316 Try this. http://www.facebook.com/stephan.tanchak I will probably spam the first start video here and post a pull or two ^_^
-
@renovatedkitchen Ok. ;D
-
@iluvzfluttershy Thats awesome! A simple first car is always the best kind of first car
-
@shred316 Ah! Lol. Thats right! xD
-
@iluvzfluttershy Welcome by the way:)
-
@renovatedkitchen i know, "its my baby" :D
-
@iluvzfluttershy lol. Thats awesome! As long as it gets from point A to B without breaking down. Is it a good car?
-
@renovatedkitchen So, what're your plans? You gonna pursue a career in cars?
-
@shred316 Actually, I really just love my job at the airport. And it pays very well. Cars is more of like a hobby thing to me I think. Although I do want to study a course in them in collage.
-
@renovatedkitchen Amen :)
-
@iluvzfluttershy lol. I wish I had listened to that advice. Or at least taken things one at a time
-
@renovatedkitchen Airport? What do you do at the airport? Are you a pilot? I'm a pilot!
-
@shred316 Oh, That would be pretty cool! But Im a line crew guy. I park, marshal and stuff like that. I really really love it. Who do you fly for?
-
@renovatedkitchen I guess, wat car do u hav
-
@renovatedkitchen I'm a student pilot. I fly local in a Piper Cherrokee. It's so much different than flying commercial.
-
@shred316 Ah, kk. If you ever become a private pilot, maybe we would meet sometime depending on where you go. I work for a company called Landmark
-
@iluvzfluttershy 1998 Eagle Talon TSI AWD
-
@renovatedkitchen Ah. That would deffinately be fun. I'd love to, but I'm only so far into my hours. What part of Canada do you live in?
-
@renovatedkitchen awesome, my neigbor has one it is pretty cool.
-
@iluvzfluttershy Nice! They are! ^_^
-
@renovatedkitchen I haz the 2006 Hyundai Elantra GT, fast acceleration but only goes 140mph, I guess thats fast but i dont want to know wat happens wen i go over 60mph.
-
@renovatedkitchen You derp
-
@renovatedkitchen What are you up to?
-
@renovatedkitchen @noirbatch G'night guys!!!
-
@iluvzfluttershy that's plenty fast. I don't really speed, but I went 90mph once without noticing I was.
-
@shred316 lol. I what?
-
@shred316 nothing really. Sorry for missing the messages. Is that you playing? And good night!!!
-
@renovatedkitchen No it's not. Your good! See you later! G'night! Get a skype!
-
@shred316 skype is stephan.tanchak
-
@renovatedkitchen Ok! Gnight! ^-^
-
@shred316 goodnight take care friend!
-
@shred316 NIGHT!!!!!!!!!!!!!!!!
-
-
