Welcome to Rainbow Dash Network, a social networking site for bronies! Whether you want a place to share your creations or just a spot to make some new friends, RDN is the place to be!

Feel free to browse the site to learn more about our community. If you like what you see, register an account and start posting! We're always welcoming to new faces!

Public timeline

Notices

  1. 7 raised beds full of tomatoes https://imgur.com/a/91MPoNd The biggest two plants are obviously bought.

    about 5 days ago from web
    • Please don’t tell anybody how much money I’ve spent on The Sims 4 http://rainbowdash.net/url/876604

      about 6 days ago from web
      • It took me 3 hours to dig out this 40-50 year old rhododendron bush stump https://i.imgur.com/AbYRYNI.jpeg The roots were super nasty. They were as thick as branches. I had to literally dig in with my hand saw and cut the roots under ground.

        about 21 days ago from web
        • Complete! https://i.imgur.com/8WSgOVB.jpeg It looks simple but it took longer than anticipated but fast enough before the days are over when there are frosty temperatures at night.

          about a month ago from web
        • Well I found out tonight that salmon skin is actually friggin delicious and I may have been wasting so much nom-nom

          about a month ago from web
          • Show all 4 replies
          • @adiwan Ever had a baked potato that turned out to have grown around a nice rock? Likewise an unpleasant crunch surprise.

            about a month ago in context
          • @scribus Ooooof.... That is a very nasty surprise. I had something similarly unpleasant: My mother uses a casserole dish made out of glass and one day there were glass chunks in the food. It turned out that due to wear the inner edge of the lid and the dish got so damaged that they eventually broke off. Only in hindsight it was obvious what happened. I got some of the glass pieces but luckily I noticed it very quickly in my mouth and nothing happened to anyone. We threw out both the casserole dish and the food.

            about a month ago in context
          • @adiwan Ooh, that is brutal, damn good luck on that outcome

            about a month ago in context
        • https://youtu.be/ODV6mxVVRZk?si=7ySjQ2rVusaRTamX

          about 2 months ago from web
          • I woke up at 4am last night from a nightmare that I had been killed in a mass shooting and then immediately posted this image in a group chat with no context and then went back to sleep http://rainbowdash.net/url/876574

            about 2 months ago from web
            • My favorite mug that I own for about 25 years has finally cracked. The handle broke on its own from the handling and the temperature changes. The crack was relatively clean. I "fixed" it with super glue but I have little confidence that it'll hold more than a year and I think it'll show other crack in that time.

              about 2 months ago from web
            • http://rainbowdash.net/url/876565 things are moving

              about 2 months ago from web
              • Kung Fu Panda 4 OST doesn't disappoint https://www.youtube.com/watch?v=OadG2zToi1s Instant goosebumps.

                about 2 months ago from web
                • My miniature paint box is finished https://www.tumblr.com/adiwan/744764666193100800/

                  about 2 months ago from web
                  • Maybe I'm getting old but I like After Midnight https://www.youtube.com/@AfterMidnightCBS

                    about 2 months ago from web
                    • I'm 3d-printing myself a grid inlay for a new box I acquired for my miniature paints. With this grid inlay I can insert compatible tiles that won't shift when the box is moved. I want to print this https://www.printables.com/model/638320-parametric-gridfinity-paint-rack for all my Army Painter paints and generic open boxes for my brushes and other random stuff. I could print specific containers for a few things but it'd be overkill.

                      about 3 months ago from web
                      • Cool! KDE 6 is finished and the features look cool. https://kde.org/announcements/megarelease/6/ I wait until Debian releases their updated packages and see if my old Thinkpad X201 still works.

                        about 3 months ago from web
                        • Did another thing https://adiwan.tumblr.com/post/743579949596819456/ho-oh-alph-ruins-puzzle-replica-i-was-yet-again

                          about 3 months ago from web
                          • It has been finished!
                            https://www.tumblr.com/adiwan/743211519247089664/i-finished-a-set-of-magnetic-unown-alphabet-tiles

                            about 3 months ago from web
                          • http://rainbowdash.net/url/876554

                            about 3 months ago from web
                          • Exclusive preview! It's not finished but I have nearly completed gift for a friend. The paint is still drying and needs some varnish, as well as a magnet on the back side. Other than that it is practically done. Sadly the colors don't show up well in the photo. The color variations are a little bit too subtle for the lighting and camera. https://i.imgur.com/tZKhdQ5.jpeg

                            about 3 months ago from web
                            • I bought a tool for splicing 3d printer filament. It's difficult as hell. I bought it so I can use up all those "too much to throw away but too short to print anything usable" spools. The main problem is that I end up having a splice that is way too thick to fit through the PTFE tube that will definitely end up as a print failure. At this point I think it is a operator failure than a failure of the tool. I give it more tries until I throw it into the corner.

                              about 4 months ago from web
                              • @adiwan Yeah, I bet there's a "touch" to it that'll take a bit to find

                                about 4 months ago in context
                              • @scribus I think too. Also I have the suspicion that the tool I bought is kind of flawed in both handling and execution https://i.imgur.com/rWLHU0z.jpeg It is made such that you put one end into the area with the Teflon sleeve and the other end to the metal hole. Both ends are then heated by a flame (candle, lighter) for a couple seconds and then pulled into the Teflon area and there the ends are pushed together while the plastic is hot. After it has cooled down the screws are loosened and the tool can be removed. The hole in the Teflon area is about 2mm in diameter while the plastic filament is 1.75mm. Ideally the hole should be the same or close in size. Either way pushing the filament into the hole while it's melted is hard as the filament itself tends to naturally curl because it has been wound up on a spool before and hand-straightening is not really easy or effective enough. I need to shave off the extra bulge back to 1.75mm in order to prevent clogs. Wasn't expensive tough.

                                about 4 months ago in context
                            • Character designs for a new series
                              http://rainbowdash.net/url/876518

                              about 4 months ago from web
                              • The next weeks I'll stay inside my house and go and touch grass when I'm finished https://i.imgur.com/bflkBGQ.png

                                about 4 months ago from web
                                • More forbidden cookies https://64.media.tumblr.com/6e4358980dd6c02305160c8d32a32aa3/599ec872b0366322-6e/s2048x3072/f284b69621c3fec3b321fb2ba5fbb839bd5ec8ba.jpg

                                  about 4 months ago from web
                                • I created forbidden cookies https://64.media.tumblr.com/65cceb301a29eed07e83106cfb42598f/bbaa5e94fd88dd9d-1b/s2048x3072/49c5397755201123433bdfba56a42fb51e1eefc5.jpg

                                  about 4 months ago from web
                                  • http://rainbowdash.net/url/876509

                                    about 4 months ago from web
                                    • My first aid boxes https://i.imgur.com/E7NbRPI.jpg Ammo boxes with appropriate stickers on both sides. I like that they have rubber seals, have a carrying handle and the lid cannot be misplaced.

                                      about 4 months ago from web
                                      • For a birthday gift for a friend, and a small pokemaniac, I crafted a Mew stone carving (from the first Pokemon movie) out of polymer clay. I used Adobe Illustrator to trace a screenshot and 3D-printed a cookie cutter and stamped it into the polymer clay and added additional stone texture with a ball of aluminium foil. After baking it at 130°C (266°F) for 40 minutes I used the crappiest acrylic paint I own. It did the job but the paint is darkening so much when dry that they turn almost black. With a liberal amount of white and other brighter paint (yellow, orange, red) I got to the end eventually. https://i.imgur.com/D7Nsjy5.jpg

                                        about 5 months ago from web
                                      • I just ordered a pack of blank ID cards. i want to use them as mini dry erase whiteboards for notes inspired by https://www.thingiverse.com/thing:5772876 However I want to put magnets on the back so I can place and reorganize these notes on my whiteboard. I could write directly on the whiteboard but I'm quickly annoyed on how any bigger change needs to redrawn and thus rarely used. This is an effort to get more organized.

                                        about 5 months ago from web
                                      • This track from Judgment just slaps https://www.youtube.com/watch?v=LqcDtgqosiY

                                        about 5 months ago from web
                                        • Changed my avatar because I got bored with Komi, from the manga "Komi Can't Communicate". I AI-generated a cartoony image of a character from my last one-shot D&D adventure. https://i.imgur.com/v5QhrYZ.jpg

                                          about 5 months ago from web
                                          • I listened to Iji Sakura from LAD Ishin way too often https://www.youtube.com/watch?v=2ESM0ckHSBY I like how it gets more intense with each repeat.

                                            about 5 months ago from web